（维修篇之二）VFR800 FI 如何通过 FI 检测车辆故障

zuohongqing · 发表于 2013-2-28 15:37

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？立即注册

×

Procedure for Fuel Injected VFR models

VTEC follows below on a reply post

To diagnose a fuel injection problem on a 5th generation vfr with the ECM self diagnosis feature,

Begin by removing the seat, locate the ?service check connector? and you will have to find a ?jumper wire? not provided.

1. With the ignition key to off and the engine stop switch on RUN
2. Short the ?Service Check Connector?
3. Turn the ignition key to on, do not start the bike though
4. If the ?FI? lights up and stays on with the ignition key on then there is no memory data
5. If the ?FI? BLINKS then there is data!

Long blink = 10 short blinks

VIDEO
here is a short video on the procedure

look for the blue connector on the left hand side of the rear subframe

zoomed out I am indicating it with my finger

my FI light blinked 12 times, number 1 injector, I found the connector was loose, I pulled it apart cleaned it and reconnected, fixed!

VTEC PROCEDURE

essentially the procedure is the same however the connector you need to short is up front on the right side near the fuse box.

438285343 · 发表于 2013-2-28 18:08

版主辛苦了，大家看不懂的就到群里去问啊！有问必答

438285343 · 发表于 2013-3-4 07:33

很详细的技术贴，每天一顶

风之灵 · 发表于 2013-3-6 06:00

技术贴要顶给大家都看到

超级疯子 · 发表于 2013-3-12 08:55

好东西收藏了

上海阿伟 · 发表于 2013-3-13 23:06

专业哦

最烦警察 · 发表于 2013-4-21 17:33

路过！学习了！！！

zx998 · 发表于 2013-11-8 20:31

{:soso_e179:}

		自动登录	找回密码
密码			立即注册

（维修篇之二）VFR800 FI 如何通过 FI 检测 车辆故障

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子

（维修篇之二）VFR800 FI 如何通过 FI 检测车辆故障